OmniSistem PR Pilot 1200 - Manual (Page 12)

Pilot 1200 manual.doc 12/20
152-159 Rotation speed 5
160-167 Rotation speed 6
168-175 Rotation speed 7
176-183 Rotation speed 8 (slowest)
184-191 Stop rotating
192-199 Reverse rotation speed 8 (slowest)
200-207 Reverse rotation speed 7
208-215 Reverse rotation speed 6
216-223 Reverse rotation speed 5
224-231 Reverse rotation speed 4
232-239 Reverse rotation speed 3
240-247 Reverse rotation speed 2
248-255 Reverse rotation speed 1 (fastest)
000-050 White
051-101 Effect 1
102-152 Effect 2
153-203 Effect 3
17
Effects Wheel
204-255 Effect 4
18
Frost
000-255 Frosting from slight to strong (0~100%)
19
Pan & Tilt Speed
000-255 Pan&Tilt speed adjustable by steps from fast to slow
20
Pan Fine
000-255 Pan rotation in 16 Bit precision
21
Tilt Fine
000-255 Tilt rotation in 16 Bit precision
000-170 Lamp ON 22
Control 171-255 Lamp OFF after 10 seconds or over
Green: ON DMX signal OK or Slave;
OFF No DMX signal;
Flash DMX error;
Red: Medium flash Menu mode;
Fast flash software, cpu error;
Both ON: Address mode,
Flash in turn: Master mode.
Pan’ s belts
Free 2 screws on Pan assembly’ s
maintenance door and open the door;
change the belts; close the door and fasten
the screws.
Tilt’ s belts
The common users replacing the belts is not
recommended.
LED DISPLAY
CHANGING BELTS
maintenace door
Pan assembly's Open the door
Screws
Base