OmniSistem Spark 7 Zoom - Manual (Page 15)

program, or perform a reset.
Main Menu
The main menu is accessed by pressing Enter until the display is lit. Browse through the menu by pressing the
arrow buttons (up, down, left, right). Press Enter in order to select the desired menu. You can change the
selection by pressing the arrow buttons. Press Enter in order to confirm selection, then exit back to the main
menu to save changes. The functions provided are described in the following sections.
① = Basic Reload ② = Program Reload ③ = Private Reload Default settings are listed in bold.
MENU SUBMENU SELECTION FUNCTION
Connect DMX Address ① XXX DMX Address Setting
Light Max Temperature ① 80~139°C, 120°C
176~282°F, 248°F Set internal
temperature to shut the
unit off. (Activates after
5 minutes.)
Lamp Adjust ① Pan…... Adjust Value
Information Time Info Current XXXX (Hours)
Fixture Life XXXX (Hours) Boot Time
Total Run Time
Temperature Near Lamp Temp Temperature Sensors
Fans Speed Near Lamp Fan Fan Speed Sensors
Channel Value Pan…... Display Channel Value
Error Message Pan, Tilt…... Channel Errors
Fixture Model [Model & Brand] Display Model & Brand
Software Version 1U01 V.1.0.00 Version of Each IC
Set Reset All
Pan & Tilt
Others Reset All
Reset Pan & Tilt
Reset Others
Movement Pan Reverse ① On/Off Pan Reverse
15 of 25