OmniSistem OnyxPro 40 - Manual (Page 7)

INSTALLATION
Inserting/Exchanging Gobos
If you wish to use other gobos, or if gobos are to be exchanged, please follow the instructions below:
Remove the fixation ring with an appropriate tool. Remove the gobo and insert the new gobo. Press the fixation
ring together and insert it in front of the gobo.
Rigging
The installation of the projector has to be built and constructed in a way that it can hold 10 times the weight for 1
hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net. This
secondary safety attachment must be constructed in a way that no part of the installation can fall down if the main
attachment fails.
When rigging, derigging or servicing the fixture staying in the area below the installation place, on bridges, under
high working places and other endangered areas is forbidden.
The operator needs to make sure that safety­related and machine technical installations are approved by an expert
before taking into operation for the first time and after changes before taking into operation another time.
The operator needs to make sure that safety­related and machine technical installations are approved by an expert
after every four years in the course of an acceptance test.
The operator needs to make sure that safety­related and machine technical installations are approved by a skilled
person once a year.
7 of 20