Technical specifications – OmniSistem OnyxPro 40 User Manual

Page 19

Procedure:

Step 1:

Remove the fuse holder on the rear panel.

Step 2:

Remove the old fuse from the fuse holder.

Step 3:

Install the new fuse in the fuse holder.

Step 4:

Replace the fuse holder in the housing.

Should you need any spare parts, please use genuine parts.

If the power supply cable of this device becomes damaged, it needs to be replaced with a special power supply
cable available at your dealer.

Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power Supply:

100240V AC, ~50/60 Hz

Power Consumption:

85W

DMX Control Channels:

16/18

DMX512 Connection:

3pin XLR

Sound Control:

Builtin Microphone

Light Source:

40W RGBW LED

Beam Angle:

Approx. 12°

Color Wheel:

8 Dichroic Filters + Open

Rotating Gobo Wheel:

6 Gobos + Open

Outside Diameter of Gobos

24 mm

Image Diameter of Gobos

18 mm

Maximum PAN Movement:

630° to 540° (Selectable)

Maximum TILT movement:

265°

Dimensions (LxWxH):

244 x 208 x 340 mm
(9.6” x 8.2” x 13.4”)

Weight:

7kg (15.4 lbs)

Maximum ambient temperature T

45°C 113°F

Maximum housing temperature T

(steady state):

60°C 140°F

19 of 20