OmniSistem OnyxPro 40 - Manual (Page 5)

Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons and
will void your warranty.
Never remove the serial barcode from the device as this would void the warranty.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short­
circuit, burns, electric shock, crashing, etc.
PRODUCT FEATURES & SPECIFICATIONS
Light
● Light source: 40W RGBW LED
● Lamp life: 60,000 hours
● Luminous Flux: 4500 lumen, 1788 lux @ 3m
● Control: Remote on/off via DMX
● Ballast: switching mode power supply
● Beam angle: 12°
X/Y
● Pan: 630° (4.0 sec) or 540° (3.58 sec), Tilt: 265° (2.8 sec)
● 16­bit resolution
● Auto repositioning
● 3­phase motor for fast and quiet movement
Colors
● RGBW LEDs for color­changing saturated colors
● Two virtual color wheels for color bounce effect
Gobos
● Outside ￠23mm, inside ￠18mm
● 6+ open, custom interchangeable position for rotating gobo wheel
● Real indexable and gobo shaking
● Distinctive gobo animation effect
Features
● DMX channels: 16/18
● RGBW LED with two virtual color wheels
● Rotating gobo wheel: 6+1 gobos
● Manual focus
● Full range 0­100% dimmer
● Various strobe
● Rotating 5­facet prism
● RDM function to change DMX address, display flip, X/Y reverse, and more
● Software upgrade via DMX
● Hibernation when lost DMX for preset time
● Indicate temperature info of base, arm and lamp
● Fan speed auto change according to temperature
Display
● 2.4 inch LCD display with English, Spanish, French, and Chinese menu
● Auto­lock
● Flip
● Back­up communicating IC
Power
● Max power consumption: 85W
● Power supply: Electronic auto­ranging
5 of 20