OmniSistem OnyxPro 40 User Manual
Page 12
Note:
After switching on, the device will automatically detect whether DMX512 data is received or not. If there
is no data received at the DMX input, the display will flash.
This situation can occur if:
●
the XLR plug (cable with DMX signal from controller) is not connected with the input of the device.
●
the controller is switched off or defective, if the cable or connector is defective or the signal wires
are swapped in the input connector.
Note:
It’s necessary to insert the XLR termination plug (with 120 Ohm) in the last lighting in the link in order to
ensure proper transmission on the DMX data link.
DMX Protocol
St
Ex Name
Function
DMX
1
1
Pan
Pan Coarse
0-255
2
Pan Fine
Pan Fine
0-255
2
3
Tilt
Tilt Coarse
0-255
4
Tilt Fine
Tilt Fine
0-255
3
5
Movement Speed
Fast to Slow
0-255
4
6
Shutter
Shutter Closed
No Function (Shutter Open)
Strobe Effect (Slow to Fast)
No Function (Shutter Open)
Pulse Effect in Sequences
No Function (Shutter Open)
Random Strobe Effect (Slow to Fast)
No Function (Shutter Open)
0-31
32-63
64-95
96-127
128-15
9
160-19
1
192-22
3
224-25
5
5
7
Dimmer
Dimmer (Close to Open)
0-255
6
8
Virtual Color Function
No Function
CTC Function
Forward Spin
Reverse Spin
Continuous
Color Bounce
Indexed
No Function
0-15
16-31
32-47
48-63
64-79
80-111
112-12
7
128-25
5
7
9
Virtual Color 1
CTC Function 2000K-2700K
White 3200K
0-223
224-23
12 of 20