NORAC UC4+BC+MS - Manual (Page 20)

17
Figure 24: Control Panel Mounting
8. For optimal performance of the UC4
system, there should be very little play
at the hitch clevis. The addition of
polymer washers can help tighten up
this connection (Figure 25).
Figure 25: Hitch Point
9. Power on the UC4+ panel, if “MS1”
shows up as your sprayer type, you can
start the “ReTune” process as per the
UC4+ Operator Manual. This will
tune the UC4+ hydraulic parameters to
your tractor hydraulic system.
10. If no type is selected yet, start the
Automatic Install as per the UC4+
Operator Manual.
ROP