beautypg.com

3 roll sensor installation, 1 boom roll sensor mounting, 2 chassis roll sensor mounting – NORAC UC4+BC+MS User Manual

Page 14

background image

11

4.3 R

OLL

S

ENSOR

I

NSTALLATION

Mount the roll sensors to the included roll
sensor brackets using the machine screws
and nylon lock nuts. (Figure 13)

Figure 13: Roll Sensor Mounting

Bracket

4.3.1 Boom Roll Sensor Mounting
1. The boom roll sensor (E04) must be

mounted to the rotating part of the
boom. Ensure the cable is facing the


right hand side of the sprayer (when
looking from the rear of the sprayer).

4.3.2 Chassis Roll Sensor Mounting
1. The chassis roll sensor (E03) must be

mounted to a non-rotating part of the
boom. Ensure the CAN-bus cable is
facing the right hand side of the sprayer.

2. Fasten the temperature probe on the

chassis roll sensor to the UC4 valve
block using the included 3/8x1/2” bolt.

Figure 14: Temperature Probe

Figure 15: Boom and Chassis Roll Sensors (MS Sprayer)

E04

E03