NORAC UC4+BC+HG User Manual

Page 23

Text mode
Original mode

4.6 C

OMPLETING THE

NSTALLATION

1. Start up your sprayer and test the

sprayer’s functionality. The NORAC
Control Panel does not need to be
powered up for the original switches to
function. Unfold the booms and
raise/lower each boom and main section.

Confirm that the cabling/hoses are

agreeable to the entire range of
motion.

2. If any functions do not work, review the

hydraulic and electrical portions of this
manual to check for proper installation.
If you still have trouble, contact
NORAC for assistance.

3. Turn on the power for the UC4+ Control

Panel using the switch on the side of its
chassis. .

4. The procedure for the installation of the

UC4+ Spray Height Control system is
now complete. Begin the AUTOMATIC
SYSTEM

SETUP

procedure

described in the UC4+ Spray Height
Control Operator’s Manual (M01).