beautypg.com

NORAC UC4+BC+NT4 User Manual

Page 25

background image

21

Figure 22: Access Plates

Configurations

6. Route the four metri-pack connectors

on cable C16 to the rear of the sprayer,
in the vicinity of the main lift valve
block.

7. Disconnect the sprayer’s metri-pack

tower labeled MM13 and connect it to
the shroud from cable C16 labeled
“MAIN UP”.

8. Connect the tower on cable C16

labeled “MAIN UP” to the sprayer
solenoid that was disconnected in
STEP 7.

9. Disconnect the sprayer’s metri-pack

connector labeled MM14 and connect it
to the shroud on cable C16 labeled
“MAIN DOWN”.

10. Connect the tower on cable C16

labeled “MAIN DOWN” to the sprayer
solenoid that was disconnected in
STEP 9.

Figure 23: Nitro Main Section Valve

Connector

Figure 24: Main Lift Wiring Connections

Main Lift

Connectors MM13