NORAC UC4+BC+JD7A - Manual (Page 29)

26
fitting from the cylinder. The orifice
is directly beneath the fitting.
17. Tee the Load Sense line (H06) directly in to
the port “S” of the shuttle valve manifold
using fitting F03 as shown in Figure 34,
Figure 35 or Figure 36.
There are multiple versions of JD
load sense blocks on sprayers.
Choose the picture that most closely
resembles your sprayer valve block
and tee in accordingly.
On some installs the Load sense hose
(H06) may be too long and the
excess hose must be coiled and
secured where it will not interfere
with other components.
Figure 34: Looking towards the rear of the sprayer on a JD4700, JD4710
Rear of
Sprayer
F03
H06