NORAC UC4+BC+HD5 Part 1 - Manual (Page 8)

4
3.2 HARDI P
ARTS
L
IST
The required HARDI Parts necessary for the UC4+ install are listed in Table 2.
Table 2: HARDI parts for HAZ, HPZ, LPZ
Item Part Number Name Quantity
HARDI04 262126 LIQUIDTIGHT CONNECTOR 1
HARDI05 262107 LIQUIDTIGHT CONNECTOR NUT 1
HARDI06 284846 CABLE TIES 175
Item HARDI04 and HARDI05 are only required when using the 44658-51 (C12A) interface
harness.
Table 3: HARDI parts for aluminum (round) booms
Item Part Number Name Quantity
HARDI07 ---------- ROUND TUBE CLAMPS FOR MOUNTING TO ALUMINUM BOOMS 4
Items numbers followed with an asterisks are to be delivered to the sprayer end-user. The
UC4+ control panel mounting hardware is required for the installation to the tractor in
accordance to the accompanied documentation.
The use of dielectric grease is not recommended on any NORAC electrical connections.
To ensure all stainless steel hardware does not gall or seize apply a light coating of the
supplied Permatex Anti-seize grease to all threaded parts upon installation. Permatex
Anti-seize lubricant is preferred, but other similar anti-seize products may be used.