NORAC UC4+BC+HD5 Part 1 - Manual (Page 19)

15
4.4 E
LECTRICAL
I
NSTALLATION
Ensure the UC4+ Control Panel us OFF for the remainder of the installation (Bottom of
switch pressed IN). Use caution when handling the 12 V power line of the sprayer wiring.
Depending on the electronics used on the sprayer, either the Norac part 44658-51 or
44658-78 will be required for this installation. For installations using 44658-51, proceed
to section 4.4.1. For installations using the 44658-78 proceed to section 4.4.2.
Figure 16: HARDI DAH on left (use 44658-51) vs. DAH09 on right (use 44658-78)