NM Engineering 498855 User Manual

Page 2

NM Engineering ∞ 3300 Corte Malpaso, Camarillo, CA 93012 ∞ 805.388.7171 ∞ 805.388.0030 FAX

[email protected] ∞ www.nm-eng.com

13. Lightly oil “O” rings on supplied billet fitting an install into

breather port then reinstall factory retaining clip.

14. Lightly oil “O” ring on billet fitting and install onto turbo air inlet

hose.

15. Reinstall air intake pipe or factory air box.

16. Using about 15” of supplied hose install from valve cover to

bottom fitting on Catch Tank. Spray WD-40 or equivalent to
ease installing hose onto fittings.

17. Using about 14” of supplied hose install from turbo inlet hose

to top fitting on Catch Tank. Spray WD-40 or equivalent to
ease installing hose onto fittings.

18. Double check complete installation.

19. When it comes time for maintenance, the Catch Tank lower

half unscrews for simple cleaning. Check fullness of tank
every two weeks or as often as necessary.