Muse Research Receptor VIP manual v1.1 - Manual (Page 3)

3
Getting Familiar: Unpacking and Setup
First, you are going to want to unpack your RECEPTOR VIP and remove all the packing material. In
your RECEPTOR VIP package, you'll find the following:
1. Your RECEPTOR VIP (of course).
2. The power cable appropriate for your region.
3. A CD containing this manual and some other useful utility software.
4. An Ethernet cable for connecting your RECEPTOR VIP to your computer.
RECEPTOR VIP is really easy to set up and get working:
1. Remove all the packing material from your RECEPTOR VIP, and place it on a stable indoor surface
with adequate ventilation where it won’t get wet.
2. Plug the power cord into the back of the unit.
Note: RECEPTOR VIP's power supply is auto-ranging and can be used anywhere in the world. All
you need is the correct AC cable to connect to the power supply to your wall outlet.
3. Plug your MIDI keyboard into the back, or your microphone into the bottom front panel input, or
your guitar into the top front panel input
4. Power it up by pressing the power button on the top right hand corner of the front panel.
5. Press the PLAY button to select a sound or effect of interest to you.
6. Make some music!
Be sure to check out our Video Demos on our YouTube Channel:
http://www.youtube.com/receptorland