Muse Research Receptor VIP manual v1.1 - Manual (Page 12)

12
Using PRESETs in the PLAY mode
Now that you have an overview of the different SoundFinder TAgs and what they provide, let's
move ahead and select a couple of presets.
RECEPTOR VIP as a Synthesizer/Sound Module
1. Connect your keyboard to the MIDI input on the back of the unit, and connect the line outputs to
a stereo mixer, keyboard amplifier, or a pair of amplified speakers.
2. Power up RECEPTOR VIP (if it is not already on). If not already lit, press the PLAY button.
3. Turn the BOTTOM knob until the "TAg:Acoustic Pianos" is displayed. Press the BOTTOM knob to
select the preset called "Studio grand".
4. Play your controller keyboard. Feel free to browse the other Acoustic Piano presets and enjoy the
high-quality sampled sounds. Simply turn the top knob and press the bottom knob to load another
preset.
5. Now lets change to a different Tag and browse another category. Turn the bottom knob until it
says "TAg: Electric Pianos". Turn the top knob to select the piano "Contrasted Rhodes." Press the
encoder to load the sound. Enjoy the richness and detail of an electric piano that uses physical
modelling to create every nuance of the classic electric piano!
RECEPTOR VIP as an Electric Guitar Effects Processor/Amp Modeller
1. Power up RECEPTOR VIP if it's not already on.
2. Locate Input A on the front panel of RECEPTOR VIP, and turn the associated gain control all the
way counter-clockwise. Plug your 1/4" guitar cable from your guitar into Input A.
3. go back to the LCD and turn the BOTTOM knob and select the Tag labeled "FX: Clean".