Muse Research Receptor VIP manual v1.1 User Manual
Page 17
17
3. Turn the gain control to minimum on Input A and plug in your acoustic guitar. Turn the bottom
encoder to select "TAg FX Acous gtr" and then turn the top knob to select the preset "005
Acstcguitar" Press the encoder button to load the patch. Of course if there is a different preset
you'd like to use on the guitar, feel free to select it now.
4. Bring up the gain on Input A, and verify that the green and yellow level indicators light on a
regular basis, but the Red indicator never illuminates.
5. Now it's time to plug in the Microphone into Input B, and select an appropriate processing effect
on that input. Turn the gain control to minimum, plug in the microphone, and if it is a condenser
microphone that requires 48V phantom power, press the switch to apply phantom power.
6. Now we need to add a channel to load in a vocal effect. Simply press the Channel + button and
a new channel will open up:
7. Now turn the bottom knob to select the "TAg: FX Vocal", and select the preset "Fat Voice."
8. Now press the PLAY button to hear both effects simultaneously. Note you can press the EFFECT
button and use the Channel + or Channel - buttons to go to a particular channel and change the
TAg or Preset in that particular channel. Be sure to adjust the gain controls so the RED LED is not
lit.
9. If you want to SAVE this combination of sounds, simply press and hold the EDIT button, and you
can save this preset to the USER TAg.