Muchmore CTX-W Tire Warmers - Manual (Page 8)

E6
8.Calibration
1.With push key and hold, input 12V power.
You can calibrate your tire warmers with your thermometer.
Calibration is required when tire warmers are changed or other purpose.
Stop pushing button.
FL will blink first.
Check the temperature of FL
with your thermometer.
:Match the temperature to the value.
:Move cursor to next step.
Calibrate FR-RL-RR warmers as same way.
If you push key on FL, CTX-W will save all calibration data and will
restart itself.
TEMP adjust mode
hand off please
:Determine target temperature
for calibration.
Target TEMP
OFF
FR:71.2 RR:69.5
FL: 68.4
FL
RL:71.0
9.Factory reset
1.With push key and hold, input 12V power.
You can reset the CTX-W when you want to return all values
to the original values.
Stop pushing button.
or :will ask you if temperature calibration reset.
Factory reset
hand off please
Factory reset
No Yes
:Factory reset then goes to Main menu.
:Goes to Main menu.
10.Contact