Motion Pro 10-3000 - Manual

INSTRUCTIONS
Process Black
White White/Black MOTION PRO, INC. LOGO
Motion Pro, Inc.
867 American Street
San, Carlos, CA 94070
Tel: 650.594.9600 Fax: 650.594.9610
www.motionpro.com
I10-3000 06/2011
WARNING
This product should be installed
by a professional mechanic in
accordance with your vehicle factory
shop manual and specifications.
Improper installation could result in
great bodily injury or death. Before
starting the engine, be sure the
throttle operates smoothly and check
that throttle body is fully closed when
throttle is released. After starting the
engine, turn the handlebar to the
right and to the left with the throttle
closed to be sure the idle speed
does not change.
1. Preparation:
a) Before installation, lubricate
cable with an appropriate cable
lube such as Motion Pro Cable
Lubricant (P/N 15-0002)
b) Securely place motorcycle on
side stand
2. Installation and routing:
This cable is designed to route on
the front side of the handlebar and
behind the front number plate.
Route cable on the opposite side
of CDI box. If CDI box is mounted
on the left side of steering head,
route cable on the right side of
steering head and vice versa. If the
CDI box is mounted under the seat,
route cable on the left side of
steering head.
RIghT SIde T3 CABle ROUTINg.
leFT SIde T3 CABle ROUTINg.