Patch pre-select recall function – MOOER BEM Box LE User Manual
Page 16
15
1. Before power on, hold down the [PATCH +] footswitch, and then
power to the BEM Box LE, will appear on the display and last
flashing for 3 seconds, it indicates setting up to Patch Pre-Select
function successfully.
3. Press both [PATCH -] and [PATCH +] footswitches together, the
selected patch will be activated, the sound changes, and the display will
stop flashing.
4. To return the normal patch selecting method, turn the power off and
then on again. The Patch Pre-Select function will not preserve when
power on again.
2. In play mode, select the patch to use
next. The selected new bank and
patch’s number flash on the display, but
the sound does not change yet.
Patch Pre-Select
Recall Function
Patch Pre-Select function can let you select the patch first but not to
activate it, and then perform an additional step to activate the patch.
To use this function, conform to the following instructions:
- MICRO DI (1 page)
- Noise Killer (1 page)
- ABY MK2 (1 page)
- Thunderball (1 page)
- Micro Power (1 page)
- Slow Engine (1 page)
- Mod Factory (1 page)
- The Juicer (1 page)
- Baby Tuner (1 page)
- Skyverb (1 page)
- Soul Shiver (1 page)
- Micro Buffer (1 page)
- TresCab (1 page)
- Cruncher (1 page)
- ShimVerb (1 page)
- Pitch Box (1 page)
- Blues Crab (1 page)
- Triangle Buff (1 page)
- E-lady (1 page)
- Grey Faze (1 page)
- Repeater (1 page)
- Ninety Orange (1 page)
- Trelicopter (1 page)
- Flex Boost (1 page)
- Blue Faze (1 page)
- Reecho (1 page)
- Rage Machine (1 page)
- Pure Boost (1 page)
- Pure Octave (1 page)
- Echolizer (1 page)
- Sweeper (1 page)
- Blues Mood (1 page)
- Fog (1 page)
- Rumble Drive (1 page)
- Solo (1 page)
- Lofi Machine (1 page)
- Acoustikar (1 page)
- Funky Monkey (1 page)
- Micro ABY (1 page)
- Graphic B (1 page)
- Graphic G (1 page)
- Yellow Comp (1 page)
- Ultra Drive MKⅡ (1 page)
- Green Mile (1 page)
- Ensemble King (1 page)