Milwaukee Tool 2260-21NST - Manual (Page 24)

22 M12 160x120 Thermal Imager Operator’s Manual
1 Press and to select the menu item to set, followed
by t to confirm your slection.
2. Press and to change the setting, followed by
to confirm the change. Changes you make to settings
remain in effect even after you turn off the power and
turn it back on again.
Changing the Settings
Use the SETUP menu to set the TIME, TIME FORMAT,
DATE, DATE FORMAT, SCALE (˚F or ˚C), BRIGHTNESS,
LANGUAGE, and the way to erase images on the installed
SD memory card. To call up the SETTINGS menu, from
live mode press , then if needed to select SETTINGS,
then to confirm your selection. The SETTINGS menu is
shown in Figure 15.
SETTINGS
TIME FORMAT
EMISSIVITY
SCALE
DATE FORMAT
DATE
12 HR
0.95
˚F
MM/DD/YYYY
09/29/2011
TIME 10:45PM
BRIGHTNESS
LANGUAGE
ENGLISH
ERASE SD MEMORY CARD
Figure 15. The Settings Menu