Milwaukee Tool 2260-21NST - Manual (Page 23)

M12 160x120 Thermal Imager Operator's Manual 21
1. From the live view mode, press then if needed
to select COLOR, then . This opens the menu bar
shown in Figure 14. Press the and arrow buttons to
make your selection, then press to confirm it.
Changing the Color Palette
The default color palette is called “IRON.” IRON, RAINBOW and GREY are all shown in Figure 14. IRON is the default. It
is better at revealing small temperature differences.
111
99.0˚F
71
GRAY RAINBOW IRON
111
110.0˚F
69
GRAY RAINBOW IRON
111
101.2˚F
71
GRAY RAINBOW IRON
Figure 14. IRON, RAINBOW and GRAY Color Palette Choices
You can change to two other color palettes: “RAINBOW”
and “GRAY.” GRAY shows the most detail and is useful for
record keeping or reporting in formats that do not allow the
use of color. RAINBOW is an alternative to IRON, which
uses more colors. RAINBOW is better for show a very wide
range of temperatures because of the additional colors. To
change the color palette, proceed as follows: