beautypg.com

MF Digital DIRECTOR Series (Rev: 06/01/02) User Manual

Page 30

background image

DIRECTOR Series Operator’s Guide

Document Revision: 0802

Page 29

Click the Perform Test button. The screen will now display:

Place a blank disc on the input spindle.

Click the Yes button.

The disc will be loaded from the input spindle and remain suspended

over reject centering spike, awaiting printer drawer to be opened:

Open the printer tray by pressing the button on the front panel of the

printer.

Click the Yes button.

The disc will be loaded onto the printer tray. Observe the disc’s position

on the tray. The CD fits into the inset on the printer tray.

The screen will now display:

Click the OK button. The disc will be unloaded onto the output spindle.

If the printer alignment is correct, press the printer retaining guides
snugly against the base of the printer and tighten down their screws. If
the alignment is not correct, adjust the position of the printer as needed
and repeat the procedure.