MF Digital DIRECTOR Series (Rev: 06/01/02) - Manual (Page 22)

DIRECTOR Series Operator’s Guide Document Revision: 0802
Page 21
Installing The Monitor, Keyboard And Mouse
Before operating the DIRECTOR, the monitor, keyboard and mouse must
be attached.
What’s In The Box
The DIRECTOR includes:
• 17” SVGA monitor
• Power cord
• Keyboard
• Mouse
• Monitor stand
• MediaFORM mouse pad
Connecting The Monitor
• Place the monitor on either side of the DIRECTOR unit.
• Make sure the monitor power switch is set to the off position.
• Connect one end of the power cord to the VAC Out on the monitor and
the other to the wall power outlet.
• Connect the High Density DB15 male connector of the video cable to
the High Density DB15 female Video In port on the back of the host
computer.
Connecting The Mouse And Keyboard
• Connect the PS/2 male connector of the mouse cord to the PS/2 female
Mouse In port on the back of the DIRECTOR.
• Connect the PS/2 male connector of the keyboard cord to the PS/2
female Keyboard In port on the back of the DIRECTOR.