MF Digital DVD-5912 (Rev: 03/05/01) - Manual (Page 27)

CD-3706/P
Operator’s Guide
Document Revision: 030501.1 5000D Series
Operator’s Guide
Document Revision: 060102
Page 26
•
Press the “START/YES” key, and you will be returned to the main
operating screen:
S E L E C T C O P Y O R C O M P A R E
Note: If discs failed to copy properly, the recorder tray drawers stay
closed upon completion. These discs should not be used. To
help you determine the nature of the problem, error messages
can be displayed by pressing the “9” key on the keypad.
Multiple Images Enabled
To make copies from hard disk images that were previously created with
the Multiple Images feature “enabled”, the steps are as follows:
•
From the main operating screen depicted below:
S E L E C T C O P Y O R C O M P A R E
•
Load as many blank discs as are required into the recorders. Press the
“COPY” key on the keypad. The screen will now read:
F R O M H D ?
•
Press the “START/YES” key. The screen will now read:
I M A G E A = [ 1 ] b = [ 2 ] c = [ 3 ]
S E L E C T I M A G E
Along the top line of the display will scroll the available images,
identified by their number (1, 2, 3, and 4). The 5000D Series defaults to
the first image (1). For the purposes of this example, press the “1” key to
select this image, followed by the “START/YES” key. The screen will
now read:
S T A R T I N G . . .
WR I T I N G L E A D I N . . .