MF Digital DVD-5912 (Rev: 03/05/01) - Manual (Page 16)

CD-3706/P
Operator’s Guide
Document Revision: 030501.1 5000D Series
Operator’s Guide
Document Revision: 060102
Page 15
General Operation
The 5000D Series is extremely versatile and offers many useful and
powerful features.
Function Keys
Various uses for the 5000D Series will be explained throughout this
Operator’s Guide. The following section explains the purpose of the
function keys.
The numeric keys on the keypad have special functions. When the main
operating screen is displayed:
S E L E C T C O P Y O R C O M P A R E
•
Press the “0” key on the keypad. The screen will now read:
1 = C O P Y 2 = S I M U L A T E
The factory setting for this function is “copy”. The “simulate” mode
is a diagnostic tool, which is useful for testing the readability of a
master disc, without actually writing to blank discs loaded into the
recorders. It is also helpful for training purposes, and for
experimenting with various system functions.
•
Press the “1” key to select “copy” or the “2” key to select “simulate”.
After pressing either key, you will be returned to the main operating
screen.
•
Press the “1” key on the keypad. Something similar to the following
will be displayed on the screen in sequence:
N T S A 1 . 0 0 0 1 0 / 0 2 / 0 1
S O F T WA R E R E V
This is the version information of the firmware currently installed on
the 5000D Series.