MF Digital SCRIBE EC_PC_manual - Manual (Page 7)

CD-3706/P Operator’s
Guide
Document Revision: 030501.1
Scribe EC Standalone Series
Operator’s Guide
Document Revision: 011804
Page 7
Getting Started
Carefully remove the Scribe EC Standalone duplicator from the shipping
container. Inspect the contents, and verify them against the packing slip.
Report any errors in shipping as soon as possible.
What’s In The Box
Your new Scribe EC Standalone duplicator includes:
• Scribe EC Standalone duplicator
• Power cord
• Firmware CD
• Operator’s Guide (on CD)
• MF DIGITAL Product & Warranty Registration card
Packing Materials
Please retain the original box and packaging in the event that the unit
requires future servicing. This will help to reduce the possibility of damage
occurring in transit.
The Best Place To Put The Scribe EC Standalone
The best operating location for the Scribe EC Standalone duplicator is in a
climate-controlled area, free of dirt, dust, humidity, excessive heat, direct
sunlight, and electronic or electromagnetic interference. Room temperature
should be between 65 and 75 degrees Fahrenheit, or between 18 and 23
degrees Celsius. Place the Scribe EC Standalone on a solid, steady work
surface, and allow sufficient room for all incidental work materials. Provide
at least six inches of clearance on all sides of the unit for ventilation.