MF Digital SCRIBE EC_PC_manual - Manual (Page 15)

CD-3706/P Operator’s
Guide
Document Revision: 030501.1
Scribe EC Standalone Series
Operator’s Guide
Document Revision: 011804
Page 15
(fig. 3)
1. Place the printer / plate onto
the drive bay (fig. 3).
Note: Picture of main body
may vary
2. Use the dotted line at the rear
of the drive bay to guide the
positioning of the printer on
the drive tower (fig. 4).
3. After placing the printer on
the drive tower, use the
“Printer Alignment” function
to align the printer. Please
refer to p 30 for details
(fig. 4)