beautypg.com

MF Digital SCRIBE EC_PC_manual User Manual

Page 24

background image

CD-3706/P

Operator’s

Guide

Document Revision: 030501.1

Scribe EC Standalone Series

Operator’s Guide

Document Revision: 011804

Page 24

• This is the version information of the firmware currently installed on

the Scribe EC Standalone.

• This displays the image size on the internal hard disk, time and date.

• This displays the Verify After status of the Scribe EC Standalone.

The Verify After function will verify a copied disc against the master
disc immediately after it has been copied.

• This displays the Multiple Images status of the Scribe EC

Standalone. Multiple images allows the user to store up to 6 separate
master images on the internal Hard Drive.

• This displays the Installed Memory of the Scribe EC Standalone.

• This displays the number of good and bad copies that were produced

to date on the system

• Press the “2” key on the keypad. You will see several functions

scroll
across the screen. Select a function by pressing the corresponding
number on the keypad. Enable or disable the function by pressing
the “Start/Yes” or “Stop/No” key.