MF Digital SCRIBE EC_PC_manual - Manual (Page 28)

CD-3706/P Operator’s
Guide
Document Revision: 030501.1
Scribe EC Standalone Series
Operator’s Guide
Document Revision: 011804
Page 28
• All of the drives will open at this time:
• Close the drive tray of the drive you would like to be drive number
“1”. It can be any one of the drives. You will then see the following
screen:
• Close the remaining drives in the order that you would like them to
read
• If you pressed “Stop/No” to “Set Drive Order”, you will be
prompted to “Change Network Settings”. Pressing “Start/Yes” will
allow you to set-up the network client feature. Please see Setting Up
Network Client section (p. 51) for further details. Pressing
“Stop/No” will bring you back to the “Select Copy or Compare”
screen.
• Press the “8” key on the keypad. The screen will now read:
The factory setting for this function is “52x” for CD and “4x” for
DVD. When selected, the Select Recording Speed feature allows
you to set the copying speed as determined by the capabilities of the
recorders installed in the Scribe EC Standalone.
• Press the “0” key to select 16x, the “1” key for 32X, or the “3” key
for 52x. After pressing any of those keys, the screen will now read: