MF Digital Windows 7 - Drive Alignment Guide - Manual (Page 7)

Printer and Drive Alignment Guide REV 3 : 12.30.10
2100 / 9100 / 3100 – 2600 / 9600 Series
PicoJet – Prism Plus – P-55 Page 6
The PicoJet 6000 is the easiest of all 3 printers
to align. This is due to the design of the tray.
You will find that the PicoJet 6000 Printer has a
more “forgiving” tray space to align the discs.
When aligning the disc on PicoJet, there are 3
points to consider, the clamping bar, and the two
white washers at the front of the tray.
As shown in the picture to the right, the disc is in
perfect alignment as it has been placed between
the 3 points indicated.
Should an adjustment be needed, use the
commands listed below.
Please note, the Insert and Accept commands
are different then that of the Prism Plus and P-
55 Printers.
PicoJet 6000 Printer Alignment Commands
O – Insert disc on open printer’s tray
U – Accept disc from open printer’s tray
CTRL-R – Move disc towards front of printer’s
tray.
CTRL-S – Move disc toward back of printer’s
tray.
Clamping
Bar