MF Digital Windows 7 - Drive Alignment Guide - Manual (Page 2)

Printer and Drive Alignment Guide REV 3 : 12.30.10
2100 / 9100 / 3100 – 2600 / 9600 Series
PicoJet – Prism Plus – P-55 Page 1
Your MF Digital DVD / CD duplicator comes pre-
aligned at the factory.
Note : If you’re running the Scribe PC, Director,
or SA Series (embedded) application, please
terminate them first before double clicking the
Loader Diagnostics icon.
Should you need to align it use this simple
procedure via MF Digital’s preset Loader
Diagnostics located at: C:/Reserved for Tech
Support/Loader Diagnostics
LEFT SIDE DRIVES
Insert / Accept Commands
9600/2600 Series Only
Left Side Drive Trays
K – Insert disc to left side open tray
B – Accept disc from left side open drive tray
CTRL-P – Move disc toward back of left drive.
CTRL-Q – Move disc toward the front of drive
Special Picojet Commands Only
O – Insert disc on open PicoJet printer’s tray
U – Accept disc from open PicoJet printer’s tray
RIGHT SIDE DRIVES
Insert / Accept Commands
9100/2100/9600/2600 Series
Right Side Drive & Printer Trays
I – Insert disc to right side open tray
A – Accept disc from right side open tray
CTRL-S - Move disc toward back of drive &
printer
CTRL-R – Move disc toward front of drive &
printer
Command Set –
Note: Caps Lock MUST BE ON
C – Calibrate Autoloader
V – Confirm Firmware Version