Maxim Integrated 78Q8430 ST 5100/OS-20 with NexGen TCP/IP Stack - Manual (Page 6)

78Q8430 Driver Manual for ST5100/OS-20 with NexGen TCP/IP Stack UM_8430_005
6 Rev. 1.0
2 System Requirements
2.1 Hardware Requirements
The following list describes the minimum hardware requirements for a 78Q8430 ST/OS-20 based
development platform:
• 78Q8430 demo board (D8430T3B_STEM).
• Software development PC with the following minimum requirements: Pentium
® 4 CPU with
256 MB RAM and 40 GB hard drive, running either Windows ® 2000 or Windows XP.
• IP Server PC with the following minimum requirements: Pentium 4 CPU with 256 MB RAM and 40 GB
hard drive, 10/100 ports for 78Q8430 demo board connection, running either Windows 2000 or
Windows XP.
• 10/100 HUB or switch.
• STi5100 evaluation platform. The STi5100 communicates with the 78Q8430 registers at base
memory address 0x43038000.
• ST Microconnect JTAG emulator. This device loads the IPSTB software into the STi5100 evaluation
platform.
2.2 Software Requirements
The following list describes the minimum software requirements for embedded applications programming
on a 78Q8430 ST/OS-20 based development platform:
• ST20 Toolset: STi5100 BSP Version 2.0.5 Patch 1.
• IPBox: contains web_server, htdocs, and video_server folders.
• IPSTB application: Ipstba3_esp – 5100.