LR Baggs Venue DI User Manual
Page 8
B
C
D
E
F
G
A
H
R E A R A N D S I D E P A N E L S
A. Input
The 1/4” input, located on the upper right side of the unit, is an unbalanced (mono) all
discrete input with a 10 megaohm impedance. It can be used with almost any passive
or active pickup or pickup system. Plugging into the input will turn the system on,
therefore unplugging will turn the system off. Before unplugging from the Venue D.I. be
sure to mute the sound system or amplifier, or a loud pop will occur.
B. EFX Send
Connect a standard 1/4” mono cable from this jack to the input of an effects pedal or
rack device.
C. EFX Return
Connect the return of the output of an effects pedal or rack device to interrupt the signal
and complete the series effect loop.
See also other documents in the category LR Baggs Microphones:
- Anthem: Installation Manual (5 pages)
- Anthem SL: Installation Manual (4 pages)
- Stagepro Anthem (6 pages)
- Anthem SL Classical (4 pages)
- M80 (6 pages)
- M1A (6 pages)
- M1 (6 pages)
- Element Active System (2 pages)
- Stagepro Element (2 pages)
- iBeam Active System (5 pages)
- iMix (7 pages)
- Dual Source (4 pages)
- LB6 Series (2 pages)
- Violin Pickup (1 page)
- Five.O. Ukulele Pickup (6 pages)
- Radius Mandolin (2 pages)
- X-Bridge: US Standard (2 pages)
- X-Bridge: Fixed (2 pages)
- X-Bridge: Vintage (2 pages)
- T-Bridge (3 pages)
- Control-X Preamp (6 pages)
- Para DI (2 pages)
- Gigpro (2 pages)
- Mixpro (3 pages)
- Acoustic Reference Amplifier (20 pages)
- Acoustic Timbre (3 pages)
- Buffer Jack (1 page)
- Deluxe Acoustic EQ (2 pages)
- Double Barrel (3 pages)
- Duet II (2 pages)
- Element Onboard System (3 pages)
- iBeam Onboard (8 pages)
- iBeam Onboard-Sm (7 pages)
- iMix Onboard (8 pages)
- Micro EQ (3 pages)
- Microdrive II (1 page)
- Ribbon Transducer (2 pages)
- RTS 2 (3 pages)
- RT System (2 pages)
- Strapjack Plus (1 page)