Longshine LCS-C844 - Manual (Page 8)

3
Specifications
Standards:
IEEE 802.3 (10BASE-T Ethernet);
IEEE 802.3u (100BASE-TX/ Fast
Ethernet); EIA/TIA RS-232/422/485;
EIA/TIA-574
Ports:
1x UTP 100/120ohm; RJ-45 type
1x 9-pin serial connector; D-sub, Male
Max. Distance: UTP: 100 meters (Cat 3/4/5.)
Serial: 15 meters (RS-232)
1,200 meters (RS-422, RS-485)
Data Rates: UTP: 10 or 100 Mbps
Serial: 115.2 kbps (asynchronous)
Signals:
RS-232: TxD, RxD, CTS, RTS, DTR,
DSR, RI, DCD, GND RS-422: TxD+/-,
RxD+/-, GND RS-485: Data+, Data-,
GND
Configuration: Bits Per Second: 38400
Parity: None
Data bits: 8
Stop bits: 1
Flow Control: None
(The console connection is only available once the
DIP switch 1 is ON)