Longshine LCS-C844 - Manual (Page 45)

40
In case you are using a serial device with 2-wire RS-
485 application or Modbus RTU protocol, do not forget
to “Enable” Packet mode of serial input. Also put
appropriate inter-packet timeout value to allow the
smooth data communication.
b) Serial Connect Status will show the serial
port connection to the serial device.
User can get the instant information about the
connectivity.
Connect Status: Server or Client
Peer IP Address: IP of remote PC access the serial
device via Device Server
Dest/Srce Port Number: Showing the destination
and source Port numbers. Source port number will be
as configured.
Byte Counts From UART: Displaying the number of
bytes transmitted from serial device.