Longshine LCS-C844 - Manual (Page 26)

21
to change the value. Once change the value,
select to apply the changes.
After entering the new IP address. The system will
confirm whether the operation is successful.
NOTE:
Copy the new address down on a piece of paper. You will
need the address when you are going to use Telnet or set
up data transfer/communication connection.
Warning
IP addresses are unique! If an address isn’t available,
please contact the appropriate authorities to apply for one.
Telnet Access
The Device Server is accessible via a Telnet. At the
command prompt type telnet 192.168.0.254 (If
connecting with default IP). You will be prompted to