Longshine LCS-C844 User Manual

Page 42

set idle - (time in seconds) – set automatic logout.

when the program or communication is idle

set xfer -

the command is for RS-232 configuration
and data communication setting. The
command syntax is as below.

set xfer [arg_1 data_1] [arg_2 data_2] ...
[arg_n data_n]
[Argument List]
Port........... Set TCP port number
statistics..... Clear statistics

upgrade - Use this command to upgrade the firmware.

i.e upgrade firmware xxx.xxx.xxx.xxx Soft2.bin

set snmp - Use this command to set SNMP settings

of the device server.

Web Browser Interface

Warning

After each configuration session, be sure to set DIP
switch 1 to the ‘OFF’ position. Otherwise, the device
server will not transmit any data.