Longshine LCS-C842SC - Manual (Page 3)

Enhanced 10/100Base-TX to 100Base-FX Converter
- 1 -
1 Introduction
About This Guide
Welcome
Thank you for choosing the Enhanced 10/100Base-TX
to 100Base-FX Media Converter.
This device
integrates copper and multi-mode/single mode fiber
networks in one flexible package.
Purpose
This guide discusses how to setup and install your
Enhanced 10/100Base-TX to 100Base-FX Converter.
Terms/Usage
In this guide, the term “Converter” (first letter upper
case) refers to your Enhanced 10/100Base-TX to
100Base-FX Converter, and
“converter” (first letter
lower case) refers to other converters.
Enhanced 10/100Base-TX to 100Base-FX Converter
- 2 -
Features
•
Automatic MDI/MDI-X selection on RJ-45 port
•
Link Fault Signaling (LFS)
•
Store-and -forward at full wire speed
•
Auto-negotiation, NWay support
•
Half/Full duplex mode selection
•
Remote and local loopback Test via DIP switch
•
When DIP switches are set, the system auto-
reboots to new configurations without powering-off.
•
Extends distance of up to 2km (6600 feet) multi-
mode fiber and 60km (198000 feet) long-haul
single mode fiber
•
Compatible with other 10Base-T & 100Base-TX
/FX devices
•
LEDs for at-a-glance device status
•
Suitable as stand-alone or in 19" 4/12-slot rack-
mount converter chassis or the single slot mini
chassis (with internal power supply)
•
FCC Class A & CE approved