beautypg.com

System and safety information, Prior to operation, Touch pad diagram – Lippert Components Ground Control 3.0 Aftermarket User Manual

Page 9: Aftermarket manual

background image

Ground Control

3.0

Aftermarket Manual

www.lippertcomponents.com (574) 537-8900

Rev: 12.01 - Ground Control™ 3.0 Aftermarket Manual

9

System and Safety Information

Failure to act in accordance with the following

may result in death or serious personal injury. The

use of the Ground Control 3.0 leveling system to

support the unit for any reason other than which it

is intended is prohibited by Lippert’s limited war-

ranty. The Lippert leveling system is designed as

a “leveling” system only and should not be used

to provide service for any reason under the coach

such as changing tires or servicing the leveling

system. Any attempts to change tires or per-

form other service while unit is supported by the

Ground Control 3.0 leveling system could result

in damage to the 5th wheel and/or cause death or

serious injury.

Be sure to park the unit on solid, level ground.

Clear all jack landing locations of debris and

obstructions. Locations should also be free of

depressions. When parking the unit on extremely

soft surfaces, utilize load distribution pads un-

der each jack. People and pets should be clear of

coach while operating leveling system. Never lift

the unit completely off the ground. Lifting the unit

so the wheels are not touching the ground will

create an unstable and unsafe condition.

Prior to Operation

The leveling system should only be operated under the

following conditions:

1. The unit is parked on a reasonably level surface.
2. Be sure all persons, pets, and property are clear of the

coach while the leveling system is in operation.

3. Make sure battery(ies) are fully charged and test at

12+VDC under load.

A

B

C

D

E

F

K

G

H

I

J

Fig. 16

Letter Description

A

Up Arrow - Scrolls up through menu on LCD

B

Down Arrow - Scrolls down through menu on LCD

C

Enter - Activates modes and procedures on LCD

D

Retract - Places system into retract mode

E

LCD Display - Displays procedures and results

F

Auto Level - Places system into auto level mode

G

Front Button - Activates both front jacks

H

Left Button - Activates left jack(s)

I

Right Button - Activates right jack(s)

J

Rear Button - Activates both rear jacks

K

Power Button - Turns system on and off

Touch Pad Diagram