Levana BABYVIEW20 - Manual (Page 15)

SYNCING CAMERA AND MONITOR
The monitor`s range is approximately 100
feet (30 meters); 150 feet (46 meters) in a
clear line of sight from the camera. Many
factors may increase or decrease the maxi-
mum wireless range. The “link” LED will be
green when the monitor and camera are
paired and red when they are not paired.
•
If the signal is lost between the monitor
and the camera the message “OUT OF
RANGE” will appear on the monitor. This
could be caused by the camera having
no power or the distance between the
camera and monitor being too far. Try
moving the camera and monitor closer
together, if this does not fix the issue, try
syncing the monitor and camera. Syncing
the monitor and camera may also
improve the audio quality.
• To sync the monitor and camera:
1. With both units powered on, press the
VOX button on the monitor and the
night light button on the camera at the
same time. Hold both buttons down for
approximately 5 seconds.
2. The words “Signal Searching” will
appear on the monitor.
3. Once the night lights (stars) on the
camera blink three times the camera
and monitor will been synced and you
can properly view your camera on your
handheld monitor.
SIGNAL SEARCHING
RANGE
9