Levana BABYVIEW20 - Manual (Page 12)

MONITOR SETUP
If using with AC adapter:
1. Plug one end of the provided power adapter into a wall outlet (both
camera and monitor power adapters are interchangeable).
2. Connect the other end of the power adapter into the power input on
the monitor.
3. Turn on the monitor by turning the volume knob on the side of the
unit. You will feel a slight click when it turns on.
4. When the monitor is on, the POWER LED on the monitor will light
up RED.
6
Note: It takes approximately 3 hours to fully charge your monitor battery.
Note: The battery does not need to be inserted to operate the monitor
from a wall outlet. However, keeping the battery in the unit will
ensure that it is charged when you need to unplug it from
the wall.