LABEC AA-17S - Manual (Page 8)

Operation manual
SEA Series Steam Sterilizers
We installed the draining filter before the device leaving factory.
(fig 3-2). Clean the draining filter once per month. You can see
the instructions of how to clean it according to page 12.
The power supply must be can afford (22L) 2300W or (17L) 1800W.
Tips: Before starting the Autoclave, please check on the local atmospheric pressure. If the pressure is lower than 0.095 Mpa
or the Altitude is higher than 500 meters, you will need to contact your distributor who should reconfigure the controller in
the device.
Preparation before using
Caution
Fig3-2
Fig3-3
Before using the device, you should make electrical connections by
using the power cord that comes with the unit. Insert the hollowed
end of the power cord in to the inlet of the machine and plug the other
end on a power outlet. Caution: The power supply can afford 1800VA
load. Ok, you can turn on the autocalve now.
4