LAARS EDN Series - Installation, Operation and Maintenance Instructions - Manual (Page 5)

Endurance Page 5
Figure 4. Part number 2400-326 for vent installations which require adjustable height and horizontal run. This kit
provides vertical and horizontal lengths of pipe from 2' to 3½' (0.6 to 1.1m). To adapt 2400-278 (vent terminal extension)
remove 3" screen section of telescoping piece. Companion section will directly fit extension.
Figure 3. Part number 2400-500 provides all of the required venting materials for appliance installations adjacent to an
outside wall and for installation of wall mounted units. Requires minimum above unit clearance of 13" (330mm) and
provides maximum horizontal length of 24" from unit center line to outside wall face.