Canon PC-D340 - Manual (Page 16)

1-9
This machine provides an energy saver function. When no operations are performed for about 5 minutes, the
machine automatically enters the energy saver mode.
• The time until the machine enters the energy saver mode can be specified in a range of 3 minutes to 30
minutes. You can also turn off the energy saver function. (
→ p. 8-4)
• The energy saver function does not activate when the machine is in the following status:
– When printing out copies, faxes* or other pages
– When sending or receiving faxes*
– While a copy job is saved in memory or when the reserve copy or other functions are operating, or
when the In Use/Memory indicator lights up*
– When paper jams occur
– When an error code appears and the Alarm indicator flashes
– When no paper is loaded in the cassette or multi-purpose tray
– When PRESS OK KEY is displayed
*Only for the FAX-L400 model
Setting the Energy Saver Mode Manually
1 Press Energy Saver.
• The LCD is turned off and the Energy Saver key lights up.
• Right after the machine is restored from the energy saver mode, or right after copying finishes, wait
about 2 seconds before pressing Energy Saver.
Restoring from the Energy Saver Mode
1 Press Energy Saver.
• The Energy Saver key goes off and the machine enters standby mode.
• The machine can be restored from the energy saver mode immediately. However, it may vary according
to room temperature and circumstances. NOTE
NOTE
NOTE
Energy Saver Mode
Intr
oduction
1