KERN & SOHN VHE 2T5A - Manual (Page 20)

8.6 Totalization
The display unit offers an option that allows the addition of weighing values and the
display of the total weight.
 Pick up the load and bring it to reference height
(example)
 Press . The value is stored and „M“ is
displayed.
The display alternately shows the consecutive
number (number of weighings) and the total weight.
After a few seconds the system automatically reverts
to standard weighing mode.
Number of weighing
procedures
Total weight
 Add-up another load as described before. Observe
that the system must be unloaded between the
weighing procedures.
8.7 Display stored weighing data
 Press for approx. 3 sec, the number of weighing procedures
and the total weight are displayed alternately
8.8 Delete the saved weighing data
 During display of the weighing data press shortly, data in the store
are deleted, the display changes automatically into weighing mode and the
„M“ extinguishes.
20 VHE-A-BA-e-1411