KERN & SOHN VHE 2T5A - Manual (Page 13)

 Press
for approx. 3 sec., the count down for setting
the second adjustment point runs off automatically.
The weight for the second adjustment point is displayed.
Moreover two points appear in the display.
 Place 2000 kg
 After placing the weight the weighing system leaves the
reference height, the display flashes
 Place the weighing system on reference height, the display
stops flashing.
 Press
for approx. 3 sec., the count down for setting
the third adjustment point runs off automatically, 0 is
displayed
 Remove weight.
 Press , vU004 is displayed, followed by PAr 
 Press for approx. 3 sec., SAVE is displayed,
followed by 0.
The balance is now in weighing mode.

Adjustment now has finished.
An adjusting error or incorrect adjusting weight will be
indicated by the error message; repeat adjustment
procedure.
VHE-A-BA-e-1411 13