KERN & SOHN VHE 2T5A - Manual (Page 19)

8.4 Zero point correction
 Switch on pallet truck scale using
button.
 Check whether the forks of the pallet truck scale are
empty
 Lift pallet truck scale till to the reference height (see
chap. 8, fig. 1).
 If the display does not show zero, reset display using
8.5 Taring
 Lift weighing container till to the reference height (see chap. 8, fig. 1).
 Switch on pallet truck scale using button.
The weight of the weighing container is displayed.
 Tare using button.
 Fill material to be weighed in the container, the net
weight is displayed.
 If the container is removed from the balance, the tare
weight is displayed as a negative value. The tare
weight remains stored until the button is
pressed anew or the balance is switched off.
VHE-A-BA-e-1411 19