KERN & SOHN VHE 2T5A - Manual (Page 14)

Carry out adjustment by entering the adjustment weight
 Switch off weighing system
 Press for 30 sec., PAR is displayed
 Press until CAL is displayed
 Press
, ZERO is displayed flashing, because the
reference height is not reached yet
 Place a pallet and adjust the reference height, when the
reference height is reached, the display stops flashing and
only the righthand bar above in the display continues to be
displayed.
 Press
for approx. 3 sec., the count down runs off
automatically.
.1000 is displayed.


 Press 2 x , 0 is displayed
 Press shortly, the display for entering the
adjustment weight is displayed, the right digit flashes.
 Use both keys to enter the desired adjustment weight:
Use to alter cipher, use to change the digit (example)
INFO: when entering 1500 kg = enter 15000 (example). With the other values
proceed in the same way: the last zero will not be considered:
14 VHE-A-BA-e-1411