8 real time clock, 9 operator information messages, 10 software version – KERN & SOHN FA 6T-3M User Manual
Page 65: 11 totalisation, 12 battery operation, Technical data, 1 indicator, Indicator

Annex page 4 of 14
Certificate of EU type-approval no. DK 0199.202 rev.1
Issued by DELTA
2.2.8
Real time clock
If it is available in the instrument, the real time clock can be activated to get printout with day and
time information.
2.2.9
Operator information messages
The weight indicator has a number of general and diagnostic messages which are described in detail in
the user’s guide.
2.2.10 Software version
The software revision level is displayed during the power-up sequence of the instrument.
The approved software version is 1.07 and 1.08.
The software version 1.08 includes possibility of multi-range.
2.2.11 Totalisation
The indicator can be configured with a totalisation function, adding actual weight display values to the
memory when pressing “M+” key if the equilibrium is stable.
Pressing “MR” key displays the total accumulated weight.
Pressing “M+” and “MR” key will clear the totalised value.
2.2.12 Battery operation
The indicator can be operated from an internal rechargeable battery, if this option is installed.
3.
Technical data
The KFN-TM / KFB-TM / BFB / IFB / SFB / UFB / UFN / NFB / BFN / NFN weighing instruments
are composed of separate modules, which are set out as follows:
3.1
Indicator
The indicators have the following characteristics:
Type:
KFN-TM / KFB-TM / BFB / IFB / SFB / UFB / UFN / NFB
/ BFN / NFN
Accuracy class:
III and IIII
Weighing range:
Single-interval, multi-range (2 ranges) or multi-interval (2
partial intervals)
Maximum number of Verification
Scale Intervals:
≤ 6000 (class III), ≤ 1000 (class IIII) for single-interval
≤ 3000 (class III), ≤ 1000 (class IIII) for multi-range and
multi-interval
Maximum tare effect:
-Max within display limits
Fractional factor:
p'i = 0.5
Minimum input voltage per VSI:
1
µV
Excitation voltage:
5 VDC
Circuit for remote sense:
present on the model with 7-terminal connector
Minimum input impedance:
87 ohm
Maximum input impedance:
1600 ohm
Mains power supply:
9 - 12 VDC / 230 VAC, 50 Hz using external adapter
Operational temperature:
-10 °C to +40 °C